References

Zheng, J., Guo, Y., Liu, X., Zhang, Z., & Zhang, T. (2021). Introduction on Research and Application of Nickel Base Superalloy GH4169. IOP Conference Series: Earth And Environmental Science, 651(2), 022081. doi: 10.1088/1755-1315/651/2/022081
Jin, Y., Zhao, J., Zhang, C., Luo, J., & Wang, S. (2021). Research on Neural Network Prediction of Multidirectional Forging Microstructure Evolution of GH4169 Superalloy. Journal Of Materials Engineering And Performance, 30(4), 2708-2719. doi: 10.1007/s11665-021-05536-3
Horke, K., Meyer, A., & Singer, R. (2019). Metal injection molding (MIM) of nickel-base superalloys. Handbook Of Metal Injection Molding, 575-608. doi: 10.1016/b978-0-08-102152-1.00028-3
Satyanarayana, D., & Eswara Prasad, N. (2016). Nickel-Based Superalloys. Aerospace Materials And Material Technologies, 199-228. doi: 10.1007/978-981-10-2134-3_9
Liu, P., Liu, X., Huang, Y., Wang, L., Li, H., & Lou, L. (2022). Effect of heating processing on the formation of micro-pores during solution treatment of high generation nickel-based single crystal superalloy. Materials Characterization, 111994. doi: 10.1016/j.matchar.2022.111994
Xu, J., Schulz, F., Peng, R., Hryha, E., & Moverare, J. (2021). Effect of heat treatment on the microstructure characteristics and microhardness of a novel γ′ nickel-based superalloy by laser powder bed fusion. Results In Materials, 12, 100232. doi: 10.1016/j.rinma.2021.100232
Hu, T., Sun, R., Li, W., Sakai, T., Lashari, M., Wang, P., & Hamid, U. (2022). Effect of treatment mode on microstructure evolution and mechanical properties of nickel-based superalloy fabricated by selective laser melting. Vacuum, 199, 110924. doi: 10.1016/j.vacuum.2022.110924
Liao, Z., Xu, D., Luna, G., Axinte, D., Augustinavicius, G., Sarasua, J., & Wretland, A. (2021). Influence of surface integrity induced by multiple machining processes upon the fatigue performance of a nickel based superalloy. Journal Of Materials Processing Technology, 298, 117313. doi: 10.1016/j.jmatprotec.2021.117313
Adegoke, O., Andersson, J., Brodin, H., Pederson, R., & Harlin, P. (2022). Influence of laser powder bed fusion process parameters on the microstructure and cracking susceptibility of nickel-based superalloy Alloy 247LC. Results In Materials, 13, 100256. doi: 10.1016/j.rinma.2022.100256
Yu, X., Wang, S., Zheng, D., Shen, X., Li, Y., & Liu, W. et al. (2022). Effect of heat treatment on rotating bending fatigue properties of K417G nickel-base superalloy. Journal Of Alloys And Compounds, 905, 164209. doi: 10.1016/j.jallcom.2022.164209
Wang, J., Wang, L., Li, J., Chen, C., Yang, S., & Li, X. (2022). Effects of aluminum and titanium additions on the formation of nonmetallic inclusions in nickel-based superalloys. Journal Of Alloys And Compounds, 906, 164281. doi: 10.1016/j.jallcom.2022.164281
GAO, S., SONG, Z., HE, B., ZHOU, L., & HOU, J. (2022). Effect of Ta addition on solidification microstructure and element segregation of IN617B nickel-base superalloy. Transactions Of Nonferrous Metals Society Of China, 32(2), 559-568. doi: 10.1016/s1003-6326(22)65815-1
Chen, J., Chen, J., Wang, Q., Wu, Y., Li, Q., & Xiao, C. et al. (2022). Enhanced creep resistance induced by minor Ti additions to a second generation nickel-based single crystal superalloy. Acta Materialia, 232, 117938. doi: 10.1016/j.actamat.2022.117938
Ou, M., Ma, Y., Hou, K., & Liu, K. (2022). Effect of hafnium content on the microstructural evolution and stress rupture properties of K4750 nickel-based superalloy. Journal Of Alloys And Compounds, 916, 165473. doi: 10.1016/j.jallcom.2022.165473
MENG, J., CHEN, M., SHI, X., & MA, Q. (2021). Effect of Co on oxidation and hot corrosion behavior of two nickel-based superalloys under Na2SO4–NaCl at 900 °C. Transactions Of Nonferrous Metals Society Of China, 31(8), 2402-2414. doi: 10.1016/s1003-6326(21)65662-5
Yang, W., Liu, C., Qu, P., Cao, K., Qin, J., & Su, H. et al. (2022). Strengthening enhanced by Ru partitioned to γ' phases in advanced Nickel-based single crystal superalloys. Materials Characterization, 186, 111809. doi: 10.1016/j.matchar.2022.111809
Wang, Y., Zhao, M., Li, Z., Li, X., Yin, F., & He, J. (2022). The synergistic effect of Re and W on the evolution of TCP phases in Nickel-based superalloys. Journal Of Alloys And Compounds, 900, 163286. doi: 10.1016/j.jallcom.2021.163286
Wu, Y., Zhao, H., Li, J., Zhang, Y., Liu, J., & Liu, T. (2022). An innovative approach towards forming the serrated grain boundaries and refining the γ′ precipitates in nickel-based superalloys. Journal Of Alloys And Compounds, 908, 164570. doi: 10.1016/j.jallcom.2022.164570
Jangali Satish, G., Gaitonde, V., & Kulkarni, V. (2021). Traditional and non-traditional machining of nickel-based superalloys: A brief review. Materials Today: Proceedings, 44, 1448-1454. doi: 10.1016/j.matpr.2020.11.632
Tang, W., Zhao, T., Dou, R., & Wang, L. (2022). Additive manufacturing of low-shrinkage alumina cores for single-crystal nickel-based superalloy turbine blade casting. Ceramics International, 48(11), 15218-15226. doi: 10.1016/j.ceramint.2022.02.052
Yu, W., Ming, W., An, Q., & Chen, M. (2021). Cutting performance and wear mechanism of honeycomb ceramic tools in interrupted cutting of nickel-based superalloys. Ceramics International, 47(13), 18075-18083. doi: 10.1016/j.ceramint.2021.03.123
Du, J., Lu, X., Deng, Q., & Bi, Z. (2015). Progress in the research and manufacture of GH4169 alloy. Journal Of Iron And Steel Research International, 22(8), 657-663. doi: 10.1016/s1006-706x(15)30054-6
Sun, B., Zhang, T., Song, L., & Zhang, L. (2022). Microstructural evolution and dynamic recrystallization of a nickel-based superalloy PM EP962NP during hot deformation at 1150 °C. Journal Of Materials Research And Technology, 18, 1436-1449. doi: 10.1016/j.jmrt.2022.03.033
KUANG, W., MIAO, Q., DING, W., ZHAO, Y., ZHAO, B., WEN, X., & LI, S. (2021). Fretting wear behaviour of machined layer of nickel-based superalloy produced by creep-feed profile grinding. Chinese Journal Of Aeronautics. doi: 10.1016/j.cja.2021.10.007
Special Metals Corporation. (2007). INCONEL ® alloy 718 [Ebook] (1st ed.). Retrieved from https://www.specialmetals.com/documents/technical-bulletins/inconel/inconel-alloy-718.pdf
Agazhanov, A., Samoshkin, D., & Kozlovskii, Y. (2019). Thermophysical properties of Inconel 718 alloy. Journal Of Physics: Conference Series, 1382(1), 012175. doi: 10.1088/1742-6596/1382/1/012175
Pereira, J., & Lerch, B. (2001). Effects of heat treatment on the ballistic impact properties of Inconel 718 for jet engine fan containment applications. International Journal Of Impact Engineering, 25(8), 715-733. doi: 10.1016/s0734-743x(01)00018-5
Wu, Y., Wang, C., Luo, J., & Huang, Y. (2022). Experimental and numerical characterization of abrasive belt wear and debris formation during dry grinding of nickel-based superalloys with diamond abrasive belts. Simulation Modelling Practice And Theory, 118, 102546. doi: 10.1016/j.simpat.2022.102546
Chen, N., Yuan, Y., Guo, C., Zhang, X., Hao, X., & He, N. (2020). Design, optimization and manufacturing of polycrystalline diamond micro-end-mill for micro-milling of GH4169. Diamond And Related Materials, 108, 107915. doi: 10.1016/j.diamond.2020.107915
Toth, A., Padayachee, J., Mahlatiji, T., & Akazi, S. (2022). Report on Case Studies of Additive Manufacturing in the South African Railway Industry. Scientific African, e01219. doi: 10.1016/j.sciaf.2022.e01219
Hazzan, K., & Pacella, M. (2022). A novel laser machining strategy for cutting tool repair. Manufacturing Letters, 32, 87-91. doi: 10.1016/j.mfglet.2022.04.005
Guo, Z., Guo, B., Zhao, Q., Liu, W., & Zheng, Q. (2021). Optimisation of spray-mist-assisted laser machining of micro-structures on CVD diamond coating surfaces. Ceramics International, 47(15), 22108-22120. doi: 10.1016/j.ceramint.2021.04.232
Klink, A., Schneider, S., & Bergs, T. (2022). Development of a process signature for electrical discharge machining. CIRP Annals. doi: 10.1016/j.cirp.2022.03.043
Biswas, S., & Rahul. (2022). The outcome of dielectric fluids in electrical discharge machining performance: A review. Materials Today: Proceedings, 56, 56-59. doi: 10.1016/j.matpr.2021.12.138
Robert, F., Prince A, A., & Fredo A R, J. (2022). Influence of wire electrical discharge machine cutting parameters on the magnetization characteristics of electrical steel laminations. Materials Today: Proceedings, 52, 746-750. doi: 10.1016/j.matpr.2021.10.141
Dražumerič, R., Badger, J., Gustavsson, T., & Krajnik, P. (2022). Mechanics of self-rotating double-disc grinding process. CIRP Annals. doi: 10.1016/j.cirp.2022.03.033
What is Grinding? - Definition from Corrosionpedia. (2018). Retrieved 7 May 2022, from https://www.corrosionpedia.com/definition/611/grinding?msclkid=a657d95acf7911ec9cfdbf5238c14c56
Sun, Y., Jin, L., Gong, Y., Wen, X., Yin, G., Wen, Q., & Tang, B. (2022). Experimental evaluation of surface generation and force time-varying characteristics of curvilinear grooved micro end mills fabricated by EDM. Journal Of Manufacturing Processes, 73, 799-814. doi: 10.1016/j.jmapro.2021.11.049
Find the Best Mini Milling Benchtop Machines in 2022 with Industrial and Micro Milling Options. (2022). Retrieved 7 May 2022, from https://www.thomasnet.com/articles/machinery-tools-supplies/mini-milling-machines/?msclkid=1a8479fba99411ecadea42a6057f03a2
Dhinesh, S., Joshua Robert, J., Tushar Nair, S., Sharne Moni, D., Sona Fowzeya, S., & Senthil Kumar, K. et al. (2022). Recent trends in additive manufacturing of electronics devices. Materials Today: Proceedings. doi: 10.1016/j.matpr.2022.04.654
Nickel-based alloy combustion chamber for turbojet engine. (2022). Retrieved 7 May 2022, from https://www.tradees.com/detail-zhongweijixie/Nickel-based-alloy-combustion-chamber-for-turbojet-engine_65537/

Literature Review This page is part of the collection 'Nickel-based Superalloy'.

Confirm copying